Rural Point-to-Multipoint ‘P2M’ Wireless Broadband Access System
Rural P2M Wireless PDF datasheet: Rural Wireless Broadband Access System
a�￠ A Point-to-Multipoint network structure with a carrier-based terminal station with user-based CPE devices
a�￠ Using frequency reuse method to build contiguous cellular networks in wide rural areas
a�￠ Enhanced 6-cell base station achieving an effective cell towera�™s range from 3Km/1.9 miles to 4Km/2.5 miles
a�￠ High gain 5.1 GHz to 6.0 GHz Broadband Directional Antennas
a�￠ Single antenna supporting efficient network access up to 120 users simultaneously
a�￠ Single base station supporting concurrent network access up to 300 high-bandwidth users simultaneously
a�￠ Single base station topping up to 900 Mbps of actual throughput when multiple users access the network, while each user accesses the network per account priority without distance impact
a�￠ User bandwidth variation is less than 10% and network access delay time is less than 10 ms in case of multi-users accessing the network
System Package
Base Station
Radio Modem CPE
a�￠ 6 element base station
a�￠ Central controller supports 3 units
a�￠ 5G, Double spatial stream
a�￠ 20MHz or 40MHz Channel
a�￠ Total system bandwidth: 600Mbps-900Mbps
a�￠ Total accessible broadband users: >300
a�￠ 5.8G integrated internal antenna
a�￠ MIMO2*2
Multiple sites in a large urban area can use cellular structure, reuse frequency to increase system capacity
Base Station Installation Display
Wireless Access 5800 CPE Installation
Rural Point-to-Multipoint Wireless Broadband Access System
